Installation Instructions for door handle with visible screw

1. To ensure the best fit, it is important that the square spindle is centered in the door during installation.
2. Place one half of the handle onto the square spindle. Tighten the stop screw so that the tip punctures the square spindle.
3. Cut the screws to an appropriate length so that they go at least 5 mm into the sleeves when installed. Consider the thickness of the door and the rosettes.
4. Place the other half of the handle onto the square spindle. Ensure that the octagonal part of the sleeves fits correctly into the octagonal holes.
5. Use the included screws and sleeves to tighten the two handle parts together using an Allen key.
6. Tighten the stop screw with an Allen key until the tip punctures the square spindle.

Installation of key plate

1. Cut the screws to an appropriate length so that they go at least 5 mm into the sleeves when installed. Consider the thickness of the door and the rosettes.
2. Place the rosettes tightly against the door. Start by positioning the sleeves so that the octagonal part fits correctly into the octagonal holes.
3. Use the included screws and sleeves to fasten the keyhole covers with an Allen key.